Well,
I wanted to use the FT-DX5000 with the SPE Amplifier from here. And rather than constructing another attenuator; I thought I would try and use the ALC to reduce the power output.
I made this circuit:
and have powered it from the 13.8V RCA socket on the back of the radio.
Now, the output of the device is adjustable from about -0.2V to -4V but no matter what voltage I set it too, the output power of the radio doesn't change.
I'm beginning to think there is an issue with the rig, or alternatively I am doing something quite dumb.
Any ideas?
I wanted to use the FT-DX5000 with the SPE Amplifier from here. And rather than constructing another attenuator; I thought I would try and use the ALC to reduce the power output.
I made this circuit:
and have powered it from the 13.8V RCA socket on the back of the radio.
Now, the output of the device is adjustable from about -0.2V to -4V but no matter what voltage I set it too, the output power of the radio doesn't change.
I'm beginning to think there is an issue with the rig, or alternatively I am doing something quite dumb.
Any ideas?
No comments:
Post a Comment